3002 Type - WiSen® Vision Unit Basics Primary Battery Power Qty. x 4 (3.6V Lithium primary D-Cell ER34615) Secondary DC Power 7 - 32VDC @ Min. 2A (e.g. 110-240VAC to 12VDC adaptor) or Solar Unit 4G Network Stop Voltage 2.1V Local Storage ≥180 days @T=10min, i.e., 26000 Images L x W x H 180 x 140 x 60mm Weight ≤ 2.0kg Cable Gland
Qty. 1 x EMC-CMA12 for Camera connection;Qty. 1 x EMC-CMA14 for external DC input power connection
Camera Mode (Factory Default Setting: Active Mode @ T=5min @ Lower Power LED Status) Passive Mode & Battery Life
Photo is not taken until a Photo-Taken command is sent, more specifically:
- At T < 5min, a photo comes back at close to real time, internal battery life ≈ 10
- At T ≥ 5min, a photo comes back with a delay of 1-2Ts, internal battery life ≈ 44
Active Mode & Battery Life (@ 4G Connection) Photo is automatically taken at every T. Sampling Time Interval - T No. 1min 3d 5min(Default Setting) 16d 15min 53d 30min 91d 60min 162d 24hr(@Low Power Green Mode) 5Yrs+ Sampling Time Interval T
[1min, 1day]. Notice: at both Active and Passive modes,
1. The bigger the T value is, the more delay a user has when getting a photo;
2. The bigger the T value is, the less power consumption a node is, i.e., internal
battery life can last longer.
Camera Image Image sensor CMOS 2MP Colour Image resolutions 1920*1080 Image compression JPEG Angle of view Horizontal Plane 85°/ Vertical Plane 45° Lens 3.6mm External Cable Length 1.0m Night vision image Black & White Night Vision Distance 1.0 to 8.0m LEDS/Buzzer and On-Site Warning Issuing Volume Max.90dB@10cm No. of LEDs
LED x 3 of Green/Blue/Red Colours +Low Power LED x 1 of Green
LED Flashing/Buzzer Frequency Red + Buzzer Warning (the highest warning level) Twice at every 2s Blue + Buzzer Warning Once at every 3s Green/Low Power Green Mode (normal level) No Buzzer Once at every 4s External Interface Wireless Module ONLY Wisen 7600E or plus Daughter Board @ Micro SIM card, WiFi module Wired Port RS232, Ethernet module WSN Interface Mesh Wireless Interface WiSen® Protocol Standard System Parameter Temperature Range: -40 to 85°C; Accuracy: ±1°C; Resolution: 0.1°C Voltage Accuracy: ±0.1V Applications
1. When a Vision Unit is deployed at Control centre/Data centre, the LED warnings can be configured with one or more
projects. So that a visual and auditory warning system can be established in the centre. This frees the operators from
frequent checking of warning emails;
2. When a Vision Unit is deployed on site:
A. the image data can help on illustrating the progress of the construction works;
B. the LED and Buzzer warnings can present a systematic visual and auditory warning to the on-site team so that the
maximum safety can be achieved.
Note: Vision Unit relies on a stable 4G connection, so its image data can be transferred smoothly and furthermore, the LED warnings can be received from a remote control centre.
Product 2D Show For Installation Brackets, please refer to https://www.wisencn.com/accessory
Type SpecificProduct Calibration Certificate: Downloadable from WiSen® Visualisation Platform, under /Download & Upload/Calibration & Document & Software/Calibration.Note: Every unit from WiSen has been fully electrically tested, calibrated, radio verified and mesh examined while individual calibration certificate is issued before shipped to our global customers.
Leica GeoMos SpecificWiSen® Programmer.zip: Firmware upgrade via WiSen Program Lead;WiSen® SD Reader.zip: Data download or rescue from in a unit with SD card storage;WiSen® Standard Serial Port Monitoring Software.zip: Data communication via a gateway on a Windows PC;Please refer to "Technical Document" for instructions.WiSen Downloader Installer v1.2.0.msi: Software to integrate Wisen data into Leica GeoMoS.
|Casing and Painting Materials:||Aluminium-Alloy Die Castings 12 (Epoxy Polyester Powder Coating)|
|IP Rating:||>= IP66|
|Operating Temperature:||-40 to 85°C|
|Certificates:||CE, FCC, ACMA, RoHS, REACH|
3002 Type - Camera Unit