넳 넲
Applications: Infrastructure tilting condition monitoring, such as retaining wall, supporting column, river embankment etc. From the 1st level of data conversion, the movement of one end of a beam/crossbar can be monitored, such as land sliding, railway track monitoring. With our latest developed mathematical model, we can achieve the Horizontal Convergence of a metro tunnel of 6 segments.
   
Casing and Painting Materials:  Aluminium-Alloy Die Castings 12 (Epoxy Polyester Powder Coating)
IP Rating:  >= IP66
Operating Temperature:  -40 to 85°C
Fire Proof:  Approved
Certificates:  CE, FCC, ACMA, RoHS, REACH
*Purchasable from Leica Geosystem     
  •   6305 Type - WiSenMeshWAN® Omni Tilt Sensor Node
     Basics
    Battery Power Qty. x 1 (3.6V Lithium primary D-Cell ER34615)
    Accuracy Stop Voltage 2.7VDC
    Mesh Stop Voltage 2.1VDC
    Battery Connection Standard Aluminium Battery Holder
    Working Current (DC) Max. 65mA (Typ. 50mA)
    Local Storage Min. 450 Messages during Meshing
    L x W x H 80 x 75 x 57mm
    Weight 0.43kg
      Primary Sensor
    Sensor Type X-axis; Y-axis; Z-axis Tilt Values
    Range -90° to +90°
    Accuracy

    0.002° (7.2″ or 0.0349mm/m) @ [-2.0°, 2.0°] & Better than

    0.01° (36″ or 0.1745mm/m) @ Any 1° over (-90°, 90°)
    Resolution 0.0001° (0.36″ or 0.001745mm/m)
      Standard System Parameter
    Temperature Range: -40 to 85°C; Accuracy: ±1°C, typical 0.5°C; Resolution: 0.1°C
    Voltage Accuracy: ± 0.1V
      WSN Interface
    Mesh Wireless Interface WiSenMeshWAN® Protocol
      Tilting Orientation

      1)  When holding the Spec paper horizontally, then when X-axis arrow rotates

           around 0-dot into the paper plane, the readings of "x" decreases; It also applies

           to both Y/Z-axis;
      2)  The node fixings must be rigid for the sensor to measure accurate data.

           Movement in the fixings will affect the readings;
      3)  The Omni Tilt Sensor Nodes must be oriented with any two axis marked on the

           label parallel to the horizontal plane, so that the data can be easily interpreted.
      Product 2D Show
          
      For Installation Brackets, please refer to https://www.wisencn.com/accessory

     

  • Common Information

    Type Specific

    Product Calibration Certificate: Downloadable from WiSen® Visualisation Platform, under /Download & Upload/Calibration & Document & Software/Calibration.
    Note: Every unit from WiSen has been fully electrically tested, calibrated, radio verified and mesh examined while individual calibration certificate is issued before shipped to our global customers.

  • FCC

    ACMA Certified

    CE

    Others

  • Common Software

    Leica GeoMos Specific

    Note: Downloadable from WiSen® Visualisation Platform, under /Download & Upload/Calibration & Document & Software/Software.
    WiSen® Programmer.zip: Firmware upgrade via WiSen Program Lead;
    WiSen® SD Reader.zip: Data download or rescue from in a unit with SD card storage;
    WiSen® Standard Serial Port Monitoring Software.zip: Data communication via a gateway on a Windows PC;
    Please refer to "Technical Document" for instructions.
    WiSen Downloader Installer v1.2.0.msi: Software to integrate Wisen data into Leica GeoMoS.
WiSenMeshWAN® Product @ 915, 868, 433MHz Radio Frequency
ꁆ ꁇ

6305 Type - Omni Tilt Sensor Node